CLAY MASK WITH PROTADERM B      A  Deionized Water  37.6  A  Methylparaben NF (Protameen)   0.3  A  Glycerin 99% (Protameen)  3.0  B Procol GMS-165 (Glyceryl Stearate and PEG-100 Stearate) (Protameen)  5.0  B  Protaderm B (Protameen)*  10.0  B  Protasorb L-20 (Polysorbate-20)(Protameen) 0.8  B  Propylparaben NF (Protameen)  0.1  C  DC 244 (Cyclomethicone) (Dow Corning)  8.0  D  Green Montmorillonite Clay (MMP)  32.0  E Sepigel 305 (Polyacrylamide and C13-14 Isoparaffin and Laureth-7)  1.7  F  Deionized Water   1.0  F  Protacide U-13 (Imidazolidinyl Urea)(Protameen)   0.3  G  Grapefruit Fragrance B2503(Carrubba)  0.2     * Ethoxydiglycol (and) PEG-7 Glyceryl Cocoate (and) Salicylic Acid (and) PPG-12/SMDI Copolymer (and) Glycereth-26 Manufacturing Instructions: Heat Phase A to 65C. Heat Phase B to 65C. Add Phase B to A with high speed agitation. Cool to 50C and add Phase C. Mix well. Slowly sift in Phase D and mix well. Add Phase E and mix the batch until smooth. Cool the batch to 40C and add premix Phase F. Add Phase G and mix well. Usage Instructions: Clean face. Apply a generous amount of the mask to the entire face. Smooth it out to obtain a uniform thickness. Allow approximately 10 ­ 15 minutes for the mask to dry. When the mask dries, rinse-off with lukewarm water and pat face dry with a soft towel. "The above information is believed to be correct, but is offered without warranty. Freedom from patent infringement is not to be inferred."